I put Bilsteins (F4-BE5-D743-HO) on the front of my 2007 KC 4x4 today. No issues with the install - everything seemed to go right together. While driving
around with them on, there was constant clunking mostly from the left side. Put the OE back on - no clunking. There was still some from the right so I put the
OE back on there too. Now it's all good again. No lift - stock ride height. Any ideas would be appreciated
Solved - the metal washer that comes with the shock goes on the stem after the spring seat and boot and inside the coil spring. Reuse the OE washer and then the new nut Noise was from not having the bushing properly compressed and stable. On the OE shocks, the washer is built into the boot.
Solved - the metal washer that comes with the shock goes on the stem after the spring seat and boot and inside the coil spring. Reuse the OE washer and then the new nut Noise was from not having the bushing properly compressed and stable. On the OE shocks, the washer is built into the boot.
